Confirm the required exposure and the verified rating of the selected model.
Waterproof Cable Assemblies
Waterproof connector wire harness solutions combine sealed connectors with specified cable, terminals, and pinout for a repeatable ready-to-use connection. Select the assembly by cable length, wire gauge, jacket, connector structure, current, voltage, and IP requirement.
Selection Guide
Use the key parameters below to choose the right waterproof connector for your application.
Choose shell size from pin count, cable OD, load, and installation space.
Match the actual cable jacket OD to the verified rear-seal range.
Use the selected model and cable data; do not infer ratings from series size.
Confirm inline, panel, branch, front, rear, straight, or angled installation.
Review water, dust, vibration, UV, temperature, oils, and chemicals separately.
Freeze connector model, cable construction, length, pinout, labels, and tolerances in one drawing.
Confirm current, voltage, conductor size, voltage drop, continuity, and insulation test needs.
Define sample approval, lot identification, inspection record, and packaging requirements.
Related Products
Products matched to this selection page.
Published Model Comparison
Compare real model data before selecting samples.
| Model | Pins | Electrical | Protection | Cable Fit | Connection |
|---|---|---|---|---|---|
| XQ-D0/E0-02 Male Series Self-Locking Plug Waterproof New Energy Connector IP67 M25 2P View Product → | 2 / 3 / 4 / 5 / 6 / 3+3 / 7 / 8 pins | 15A / 20A / 30A / 40A+5A / 120V / 600V | IP68 | 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm | Overmolded |
| XQ-D0/E0-02 Female Series M25 Self-locking Architectural Lighting Plug 35A Waterproof IP67 Male Female Connectors View Product → | 2 / 3 / 4 / 5 / 6 / 3+3 / 7 / 8 pins | 15A / 20A / 30A / 40A+5A / 120V / 600V | IP68 | 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm | Overmolded |
| XQ-B0/E0-05 Series M16 Thread Nylon/PVC Injection Molding Male View Product → | 2 / 3 / 4 / 3+4 pins | 3A / 10A / 60V / 600V | IP68 | 0.3mm²-1.0mm² (22-14AWG) / Ø3.5mm-Ø10mm | Threaded / Nylon/PVC Overmolded |
| XQ-D0/E0-02 Mixed-Pin Female Series M25 Self-locking Nylon/PVC Injection Molding Female View Product → | 2 / 3 / 4 / 2+1+2 / 2+1+5 / 2+8 / 4+7 pins | 20A / 40A / 45A+15A+5A / 50A+30A+5A / 40A+3A / 60V / 120V / 600V | IP68 | 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm | Overmolded |
| XQ-D0/E0-02 Mixed-Pin Male Series M25 Self-locking Nylon/PVC Injection Molding Male View Product → | 2 / 3 / 4 / 2+1+2 / 2+1+5 / 2+8 / 4+7 pins | 20A / 40A / 45A+15A+5A / 50A+30A+5A / 40A+3A / 60V / 120V / 600V | IP68 | 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm | Overmolded |
| XQ-D0/E0-08 Mixed-Pin Female Series M25 Self-locking Nylon/PVC 90° Injection Molding Female View Product → | 2 / 3 / 4 / 2+1+2 / 2+1+5 / 2+8 / 4+7 pins | 20A / 40A / 45A+15A+5A / 50A+30A+5A / 40A+3A / 60V / 120V / 600V | IP68 | 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm | 90-Degree Overmolded |
Published values are selection references, not a substitute for the approved model drawing and mating confirmation.
Model-level fields are shown only when they are published in the product record.
Application Scenarios
Built for environments where reliable waterproof connections are critical.
Industrial Automation
Sensors, actuators, and control systems in harsh environments.
Outdoor Lighting
LED fixtures, signage, and infrastructure lighting systems.
Renewable Energy
Solar inverters, energy storage, and monitoring equipment.
Transportation
Rail transit, electric vehicles, and charging infrastructure.
Marine & Offshore
Navigation, communication, and equipment on marine platforms.
Construction Machinery
Heavy equipment and mobile machinery connector systems.
Selection risks and limits
Check these conditions before approving a sample or drawing.
A correct connector with the wrong pinout can damage equipment.
Uncontrolled cable substitution can change OD, flexibility, temperature behavior, and sealing.
Custom assembly capability does not imply every cable, certification, or test is available; confirm the approved bill of materials.
RFQ Preparation
Send complete requirements for a faster model and quotation review.
RFQ checklist
- Application and environment
- Cable length, jacket, and labels
- Current and voltage
- Pin count and pinout
- Exact male and female mating pair
- Quantity and sample stage
- Required drawings or certificates
Confirm Before Approval
These fields are not inferred from a series or IP label. Ask engineering to confirm them for the selected model.
- Operating temperature range
- Exact mating part number
- Model drawing or datasheet
Technical Resources
Only published resource records are shown here.
Certifications
Only published certificate records are shown here.
Frequently Asked Questions
Find answers to common questions about our waterproof connectors.
What is a waterproof cable assembly?
It is a cable delivered with sealed connectors, defined wire construction, and a confirmed pinout so it can be installed without separate connector termination.
Can you make a custom waterproof wire?
Yes. Cable length, conductor size, jacket, color, terminals, connector gender, labels, and packaging can be customized for an OEM project.
What information is needed for a cable assembly quote?
Send the connector model or drawing, cable length, wire gauge, pinout, current, voltage, cable OD, IP rating, quantity, and required certificates.
Are waterproof cable assemblies available with T or Y branches?
Yes. Straight, right-angle, T, Y, molded, and assembled structures can be reviewed based on cable routing, branch length, current, and installation space.
How does cable OD affect waterproof performance?
The rear seal must match and compress around the actual cable jacket. A cable OD outside the seal range can reduce water and dust protection.
How do I choose a waterproof cable connector?
Start with cable OD, wire gauge, core count, rated current, voltage, IP rating, and whether the connection is inline, branch, or panel mounted.
Can waterproof plugs be supplied with cable?
Yes. Plugs can be supplied as field-assembly parts, pre-assembled cable ends, or molded cable assemblies after the cable and pinout are confirmed.
Can waterproof cable assemblies be customized?
Yes. Cable length, wire gauge, jacket material, color, terminals, labels, and packing can be customized for OEM and ODM projects.
Can connectors be pre-assembled for LED fixtures?
Yes. Pre-assembled cables can reduce installation time and improve consistency for fixture production.
Do you support custom harnesses for machines?
Yes. Custom cable assemblies can be prepared for machine wiring with defined cable length, pinout, terminals, and labeling.
Need help choosing waterproof connectors for your project?
Share application, current, voltage, pin count, cable OD, mounting type, target IP rating, quantity, and required documents. Our team will help confirm the product direction.





