Browser mode is not supported

This browser is using a compatibility engine that cannot render the site layout correctly. Please switch to Speed/Chrome mode, or open the site in Microsoft Edge or Google Chrome.

Home Products Chinese

Self-Locking Waterproof Connectors

Self-locking waterproof connectors use a push-to-connect locking mechanism for faster mating and servicing than a screw-coupled interface. The selected pair still needs verified retention, release access, pinout, cable OD, electrical ratings, and mated sealing conditions.

Selection Guide

Use the key parameters below to choose the right waterproof connector for your application.

IP Rating

Confirm the required exposure and the verified rating of the selected model.

Connector Size

Choose shell size from pin count, cable OD, load, and installation space.

Cable OD

Match the actual cable jacket OD to the verified rear-seal range.

Current / Voltage

Use the selected model and cable data; do not infer ratings from series size.

Mounting Type

Confirm inline, panel, branch, front, rear, straight, or angled installation.

Application Environment

Review water, dust, vibration, UV, temperature, oils, and chemicals separately.

Lock and release

Confirm the actual latch, insertion force, release action and accidental-release risk.

Service access

Check hand clearance, mating cycles and whether the connector can be reached after installation.

Verified pair

Approve the exact male/female models, pinout, cable OD, ratings and mated sealing condition.

Related Products

Products matched to this selection page.

Engineering Selection

Published Model Comparison

Compare real model data before selecting samples.

Model Pins Electrical Protection Cable Fit Connection
XQ-C0/E0-03 Series M20 Self-locking IP67 Waterproof Male Female Connector View Product → 2 / 3 / 4 / 6 / 7 / 3+9 pins 10A / 15A / 20A / 15A+2A / 300V / 600V / 600V+60V IP68 0.5mm²-2.5mm² (20-12AWG) / Ø5.0mm-Ø10.5mm Panel-Mount
XQ-C0/E0-07 Series M20 Panel Mount IP67 300V 15A Waterproof Nylon Connectors View Product → 2 / 3 / 4 / 6 / 7 / 3+9 pins 10A / 15A / 20A / 15A+2A / 300V / 600V / 600V+60V IP68 0.5mm²-2.5mm² (20-12AWG) / Ø5.0mm-Ø10.5mm Panel-Mount
XQ-C0/E0-08 Series Elbow Head Push Plug IP67 20A M20 2P Waterproof Cable Connectors View Product → 2 / 3 / 4 / 6 / 7 / 3+9 pins 10A / 15A / 20A / 15A+2A / 300V / 600V / 600V+60V IP68 0.5mm²-2.5mm² (20-12AWG) / Ø5.0mm-Ø10.5mm 90-Degree Overmolded
XQ-D0/E0-02 Series Customized Factory Price M25 Waterproof Assemble Female and male Plug View Product → 2 / 3 / 4 / 5 / 6 / 3+3 / 7 / 8 pins 15A / 20A / 30A / 40A+5A / 120V / 500V / 600V IP68 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm —
XQ-D0/E0-03 Series Front Male Panel Mount Charging Pile M25 Waterproof IP67 Industrial Connector View Product → 2 / 3 / 4 / 5 / 6 / 3+3 / 7 / 8 pins 15A / 20A / 30A / 40A+5A / 120V / 600V IP68 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm Panel-Mount
XQ-D0/E0-07 Series Waterproof Connector for Stage Video Screen Equipment M25 High Current Rate IP67 Panel Mount Plug and Socket View Product → 2 / 3 / 4 / 5 / 6 / 3+3 / 7 / 8 pins 15A / 20A / 30A / 40A+5A / 120V / 600V IP68 1.0mm²-8mm² (16-12AWG) / Ø7.0mm-Ø12mm Panel-Mount

Published values are selection references, not a substitute for the approved model drawing and mating confirmation.

Model-level fields are shown only when they are published in the product record.

Selection risks and limits

Check these conditions before approving a sample or drawing.

Failure risk

Using quick-connect as a generic label can hide different and incompatible locking mechanisms.

Failure risk

Side load, cable pull or blocked release access can make a fast connector unreliable in service.

Scope limitation

Self-locking does not mean tool-free suitability, unlimited mating cycles or waterproof protection while unmated.

Engineering Selection

RFQ Preparation

Send complete requirements for a faster model and quotation review.

RFQ checklist

  • Application and environment
  • Current and voltage
  • Pin count and pinout
  • Cable OD and wire range
  • Exact male and female mating pair
  • Mounting or locking method
  • Quantity and sample stage
  • Required drawings or certificates

Confirm Before Approval

These fields are not inferred from a series or IP label. Ask engineering to confirm them for the selected model.

  • Operating temperature range
  • Exact mating part number
  • Model drawing or datasheet
Send Requirements

Frequently Asked Questions

Find answers to common questions about our waterproof connectors.

Is self-locking the same as any quick connector?

No. Self-locking describes a verified mechanical lock; quick-connect is broader. Confirm the actual latch, release method, retention, and mating drawing.

Is self-locking always better than threaded locking?

No. It can reduce service time, while threaded coupling may suit projects needing deliberate screw engagement. Choose from the installation and maintenance conditions.

What should be tested before approval?

Check retention, release access, mating cycles, cable pull, vibration, pinout, electrical load, and sealing under the defined installed condition.

Can an unmated self-locking connector remain waterproof?

Do not assume so. Protection normally depends on the defined mated or capped condition for the selected model.

What IP rating should I choose for my application?

Choose IP67 for rain, spray, and temporary immersion. Review IP68 when longer water exposure or stricter project tests are required.

How do I install waterproof connectors correctly?

Match the cable OD to the seal, tighten the mating and rear nuts evenly, avoid cable bending stress, and confirm the connector is fully mated.

What materials are used in your connectors?

Common options include PA or TPU bodies, copper alloy contacts, nickel or gold plating, and silicone or rubber sealing parts depending on the series.

Do you provide connector samples?

Samples can be arranged after the target series, structure, cable specification, and application requirements are confirmed.

What is the typical lead time for orders?

Lead time depends on model, quantity, customization, and document requirements. Standard items are usually faster than custom cable assemblies.

Self-Locking Waterproof Connectors

Need help choosing waterproof connectors for your project?

Share application, current, voltage, pin count, cable OD, mounting type, target IP rating, quantity, and required documents. Our team will help confirm the product direction.